Technical Support / 1648
Rhapsody Programming
Time change
-
From any extension with LCD display .
-
Press PRG/HLD
-
Enter * 1234 (Now in program mode)
-
Enter 11 (Date and Time)
-
Enter new time in 24 hr format
-
Now press the grey key located on the 2nd row far right hand side below the LCD display
-
Press SPK
-
Speed Dial - 308, 512, 824, 1648 Add Number
Note:
One of the function keys on the System Manager's telephone must be programmed for the Central Abbreviated Dialling (ABD). Refer to user's guide.
The entry of a new telephone number with an assigned number will delete the existing telephone number.
-
1. Press PRG/HLD
-
2. Press ABD
-
3. Key in the central abbreviated dialling code (00 - 99) under which the telephone number is to be stored.You may wish to wait for the display to change.
-
4a. Press 0 if the stored number is to be made on a direct exchange line
or
-
4b. Press 2 if the stored number is to be made via a PABX line.
-
The display shows the current stored number, or 'VACANT'
-
5. Key in the telephone number to be stored (up to 18 digits) . Include the exchange line access code if via PABX (usually '9' ).
-
6. Press PRG/HLD again. (A single tone confirms acceptance of the number. A double tone indicates a mistake
-
made, start again from step 2.)
-
7. Repeat steps 2. to 5. to add further numbers.
or
Speed Dial 306, 512, 824, 1648 Delete Number
-
1. Press PRG/HLD
-
2. Press ABD
-
3. Key in the central abbreviated dialling code (00 - 99) for the number to be deleted.
-
4. Press 0 .
-
5. Press PRG/HLD again (A single tone confirms deletion of the number. A double tone indicates a mistake
-
made, start again from step 2.)
-
6. Repeat steps 2. to 5. to delete further numbers
or
Speed Dial 306, 512, 824, 1648 Check Number
-
1. Press PRG/HLD
-
2. Press ABD
-
3. Key in the central abbreviated dialling code (00 - 99) for the number to be deleted.
-
4. Press 0 .
-
The number stored here will be displayed.
-
5. Repeat steps 2. to 5. to check further numbers
or
