Technical Support / DK24

Speed Dial Numbers - DK 24

To store a personal speed dial number:

• Do not lift the receiver
• Press # (or LNR ) and * (or SDS ) buttons respectively.
• Press the ADL button you wish to use
• Dial the telephone number to be stored. Up to 17 digits
• It may be necessary to inset a pause after the external line access code. If so, press the MW/RC (or PAU ) button after the PABX access code (see Pauses )
• Press # (or LNR ) button
• The number is now stored.

Speed Dial Numbers - DK 24

To store a system speed dial number:

• Do not lift the receiver
• Press # (or LNR ) and * (or SDS ) buttons respectively.
• Dial the 2 digit speed dial code ( numbers run consecutively from 60 - 99 )
• Dial the telephone number to be stored. Up to 16 digits
• Press # (or LNR ) button to record into memory
• The number is now stored. It may help to write down a note of the codes for future reference.
• Repeat steps above for every number to be stored, up to a maximum of 40

To Store Pauses and Recalls with Speed Dial Numbers - DK 24

• Press PAU (or PAU/L) button to store a pause
• Press MW/RC button to store a recall
• Note:
• If a PAU button is not available, the MW/RC will store a pause and recall signals cannot be stored.
• The PAU button is 1.5 or 3 seconds long, depending on system programming.
• A 10 second pause is programmed using the PAU/L button.